RD50
Right - Angle gear reducer
Compact reducer, high-performance, suitable for various industrial applications that require high yields. In particular for automation and robotics, applicable also to motors.
• Housing made of anodized aluminium
• Shafts made of steel with surface hardening treatment, high wear and fatigue resistance plus friction reduction and significant increase in corrosion resistance
• Standard transmission ratios: 1/1 - 1/2,5 - 1/5 - 1/7,5 - 1/10 - 1/15 - 1/25 - 1/30
• Several mounting options with protruding input and output shafts and cable.
• Available versions:
- RD50 gearreducer
- RD50S with sensor
- RD50M with DC motor
- RD50MR with gearmotor
- RD50MS with DC motor and sensor
- RD50MRS with gearmotor and sensor
➜ Per i dati del sensore e dei motori, consultare la sezione "Dati Tecnici Generali" nel menù a tendina a destra.
Photogallery
|
APPLICATION EXAMPLES |
 |
 |
 |
| RD50 |
|
|
|
1. Nr. 3 fixing screws M4 a 120° |
| ROTATION DIRECTION |
 |
| a. Input shaft: "fast" shaft b. Output shaft: "low" shaft c. Output shaft: "low" shaft |
|
SENSOR FOR RD50 |
|
|
|
|
|
Dimensions |
12 x 50 x 50 cm |
|
Power supply |
10 ÷ 30 Vdc ±10%, max 60 mA |
|
Accuracy |
256 pulses/revolution |
|
Max. current ouput |
channels A - B (20mA) |
|
Protection degree |
IP66 |
|
Case |
anodized aluminium |
|
Working temperature |
-10 ÷ 70 °C |
|
Working humidity |
10 ÷90% |
|
Output |
0,5 - 1 -2 -5 -10 meters |
|
EMC |
2004/108/CE |
|
The sensor converts the rotation output shaft of the gearbox |
|
| MOTORS FOR RD50 | |
 |
 |
|
MOTORS "M" WITH COUPLING RD50 |
GEARMOTORS "MR" WITH COUPLING RD50 | ||||||
| A | B | RPM | TORQUE (Nm) | A | B | RPM | TORQUE (Nm) |
| 35 | 56 | 2200 | 0,06 | 30 | 79 | 450 | 0,4 |
| 40 | 98 | 5600 | 0,2 | 42 | 113 | 420 | 0,7 |
| 35 | 65 | 11000 | 0,05 | ||||
|
➜ suitable for alternate movements |
➜ suitable for continuous movements |
||||||
| AVAILABLE VERSIONS | |
| RD50 reducer | RD50S with sensor |
 |
 |
| RD50M with motor | RD50MR with gearmotor | |
 |
 |
|
| RD50MS with motor & sensor | RD50MRS with gearmotor & sensor | |
 |
 |
|
The «GC» and «GCC» cardan joints used for the transmission of torque and movement of non-aligned elements.
Main features: universal application, high reliability, maintenance free, extremely precise and ease-of-use.
• Case entirely machined from solid, in stainless steel AISI303.
• Suitable for intermittent (UI) and continuous movements (UC).
• Maximum working angle 45 °.
➜ for more complete information, see GC and GCC
Richiedi l'accesso
| TECHNICAL FEATURES | |
| FA▪︎ = axial input shaft | 100 N |
| FA▪︎ = axial output shaft | 200 N |
| FR▪︎▪︎ = radial input shaft | 1000 N |
| FR▪︎▪︎ = radial output shaft | 2000 N |
| Max. backlash | 0,75° |
| Max input rpm (1/min) | 5.000 |
| Working temperature | -20 +80° |
| Life | 10.000 hours |
| Weight | 730 Kg |
| Lubrication | long life grease |
| EFFICIENCY TABLE | |||||||||
| i | 1/1 | 1/2,5 | 1/5 | 1/7,5 | 1/10 | 1/12,5 | 1/15 | 1/25 | 1/30 |
| R % | 0,72 | 0,74 | 0,60 | 0,61 | 0,54 | 0,39✽ | 0,45✽ | 0,25✽ | 0,29✽ |
|
TI Nm |
13,95 | 5,42 | 3,32 | 2,19 | 1,84 | 2,04 | 1,48 | 1,62 | 1,13 |
| TO Nm | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
✽ irreversibility
| Legend: |
| i = transmission ratio |
| R = efficiency |
| TI = input torque |
| TO = output torque |
➜ In case of continuous use, please contact our Technical Dept. In such applications, a grease fitting will be installed to allow periodic addition of lubricant with a frequency based on the work conditions.
⁃ To identify the most suitable gear reducer for your requirements, refer to the values in the table. If the real loads and efficiency are very close to the table values, contact the technical department.
⁃ All tables show linear measurements expressed in <mm>, unless otherwise specified.
⁃ All the reduction ratios are expressed as a <fraction> unless otherwise specified.
⁃ All forces, efficiency and the loads are expressed in <N or Nm> (10 N ≅ 1 kg or 10Nm ≅ 1Kgm ) unless otherwise specified.
